 |
 |
 |
|
The GTO/PROŽ Push Button Control is an unlighted button for remote entry or exit control. Connects directly to the control board using 16 gauge stranded, low voltage, direct burial wire RB509 (not included).
The Push Button Entry Control is an unlit doorbell button for remote entry or exit control. If you do not need to limit access to your property, the push button control can be installed outside of the gate to allow entry for guests without transmitters. It can be installed on the inside of your gate to allow guests without transmitters to exit. If your home is within 1000' of your gate, you can install the push button in your house. The Push Button entry control wires directly into the control board using GTO low voltage wire. (not included).
PLEASE NOTE: If you use the RB101 outside it has to be protected from the weather. |
|
|
|
|
|
|
|
|
